motocomposites Reviews

michael H - 06/23/2017

Motocomposites does amazing carbon fiber products. My front fender and rear hugger look awesome on my 14 Ninja 1000. Delivery is surprisingly fast and the customer service is top notch!

Anonymous Customer - 06/20/2017

The quality of the piece was beautiful and they look amazing on my H2. The problem was that the front two holes were to small for the OEM hardware to screw into so I had to find screws that fit it correctly. Not a big deal but it should be either included or made note of so customers like myself are not left scratching our head with the entire front end of the bike apart. I've ordered multiple parts from this company and they are all amazing quality and his is my only issue I've had. I'd order again no doubt.

Ernesto M - 06/19/2017

Item looks good and I was surprised with the price. When I received the product I try to install it and was a nightmare. The clips are too big to fit in the taillight, they are too big and is was so hard to even try to put it on. Motocomposites replies: some previous feed back suggested that we make the tabs larger to ensure a very tight fit as there are fewer points to secure the part than the counterpart with the cutouts. Customer was subsequently able to file down the tabs to make it fit.

Anonymous Customer - 06/17/2017

Perfect fit and finish! Great price on a nice part

Anonymous Customer - 06/17/2017

The fit and finish were great and fast shipping too

Cleve B - 06/09/2017

I bought all the radiator pieces so this review applies to all I bought the fiberglass/carbon pieces mostly due to cost. The look is indistinguishable from pure carbon. Fit and finish is good (only minor fitting required). Too early to tell about durability. Only down side so far was/is I had to wait two full months to receive my order (?).

Anonymous Customer - 06/03/2017

Vibrated / fell off my bike and another rider ran it over. Was under imoression this thing was sandwiched in between the tail but this thing isn't secured by/to anything. Tape/glue the tabs as 'recommended' I recommend updating your mold and fabricating this so it clips/latches once tabs are in place.

Antonis - 06/02/2017

very good quality and fast shiping

Anonymous Customer - 05/26/2017

I have purchased numerous carbon bits for my 2016 939SP. Up until I received the pump cover, all of the parts required light to extensive massaging with a dremel, sand paper, or a file to get them to fit correctly. This piece was the first one that bolted up with no messing around, the quality is good, and it looks nice.

Owen - 05/25/2017

My composite accessories from Motocomposites.com arrived and I must say how impressed I am with the quality of craftsmanship. Installation was as easy as an OEM product. I'm glad I found my carbon fiber specialist for any future needs!

Owen - 05/25/2017

My composite accessories from Motocomposites.com arrived and I must say how impressed I am with the quality of craftsmanship. Installation was as easy as an OEM product. I'm glad I found my carbon fiber specialist for any future needs!

Owen - 05/25/2017

My composite accessories from Motocomposites.com arrived and I must say how impressed I am with the quality of craftsmanship. Installation was as easy as an OEM product. I'm glad I found my carbon fiber specialist for any future needs!

Gamy - 05/23/2017

Highly recommend the twill finish is excellent and the gloss is really nice good quality the wait is a little long but i'm happy with the product the only negative thing is that it would had been nice to include the adhesive.

Anonymous Customer - 05/22/2017

Recently purchased body parts from MotoComposites. I got the radiator/body vents which went on easily. The carbon was consistent on each piece as was the finish. Delivery was fairly quick as well. I'll be looking to purchase more parts for my MV from MotoComposites in the future.

Jacob B - 05/18/2017

Ordered this in glossy twill for my 2016 Ninja 650. You will need to order replacement velcro pads for this part but the other stock parts will transfer over. Had a real tough time installing due to some of the fitment pegs being a little too big. Decided to break the front two off in order to make it fit correctly and used double sided sticky tape as an alternative. This did the trick and it fit perfectly. Do be careful, if you decide to keep all the pegs on it may scratch the paint of the tank since the fitment is very tight. Overall looks amazing just a little tough to get on. Still very happy with the purchase and no issues with fitment after removing two of the pegs.